The ABS module is an essential part of a car. The anti-lock braking system (ABS) is a type of computer that receives information from the wheel speed sensor and is used to prevent loss of stability.
But, what can you do when your vehicle’s ABS module is not working properly? In this situation, you have to replace your Ford Edge ABS module. This article helps you to get everything to replace the module without making any mistakes.
Ford Edge ABS Module Replacement (A Complete Guide)
The ABS module is a type of computer programming system. There are two sides you need to focus on to replace the ABS module. First, computer programming, and second is physical part of the module.
- Computer Programming
To fix the problem, you need to start the program module by using Ford IDS software. With this software, you can easily replace the module.
You have to install the program properly and should not avoid any steps. I used pro-level scan software (Snap-On) which also worked properly without producing any errors.
Based on my research and experience, I found 3-different methods that you can apply to configure the module and replace your old ABS module.
- Programmable parameters
- Module reprogramming (Flashing)
- Programming module installation
Note, that some of the modules don’t support these three configurations. If you find any errors in configuring these three points, you can contact Ford Edge to solve the issues.
- Physical Part of ABS Module Replacement
If you fix the computer program area of the ABS module and still find the problem, you should have a look at the physical part of the ABS module.
First of all, you have to find out the ABS module from your vehicle. It is located on the side front corner of the engine compartment.
Second, if you find a bad smell from the module or worn the module parts, you should replace it with a new one. Or, you can also repair the ABS module to fix the problem.
Symptoms of Bad Ford Edge ABS Module
How can you understand that your vehicle ABS module is bad enough and you need to replace it as soon as possible? Break down the following symptoms and fix the problem.
- When the ABS module fails, the skid protection is not turned
- The brake system will be harder
- Your vehicle wheels leave the tarmac
- TSC and warning lights will illuminate the dashboard
- Drivers will get several error code
Ford Edge ABS module problems come out when the ABS module comes with these symptoms. In this situation, you should stop to drive your vehicle.
Can I Drive with an ABS Control Module Problem?
Undoubtedly, your vehicle is not disabled and you can drive. But, I recommend you avoid driving while your car has an ABS module problem because of safety concerns.
If the hard brake is normally controlled by the ABS control module, a collision may occur. On the other hand, your vehicle’s acceleration also becomes harder to control.
Overall, you should avoid driving your vehicle when it comes to an ABS module problem. But, you can drive your car if you need to drive it emergency.
2013 Ford Edge ABS Module Recall
Ford announced that their 53 vehicles have been affected by the electric brake control. The 2013 Ford Edge ABS module also comes with this problem. Besides, in 2013 they also recalled 2015 and 2015 models of the vehicle.
Ford recalled these vehicles because they also found ABS module problems. Some of the vehicles are affected when the dealer services the vehicles.
So, they need to repair or replace the faulty areas of the 2013 Ford Edge ABS module and other sections. It is the main reason that they recall this model of vehicle.
2011 Ford Edge ABS Module Replacement
If you have a 2011 Ford Edge vehicle and the ABS module is not working, you need to replace it. Typically, ABS module last a lifetime but some of the vehicle produces this problem.
However, you have to know that the ABS module is a type of computer programming that collects data from the vehicle wheels. If the programming system is not working, you need to fix it fast.
To fix this problem, you need to install the Programmable module using Ford IDS software. Make sure that you don’t skip any steps and provide accurate information.
If are you still facing this problem, you should find the ABS module and need to inspection it. Bad smells, worn parts, and corrosion indicators help you understand that your vehicle’s ABS module needs to be replaced.
2012 Ford Edge ABS Module Replacement
2012 Ford Edge is another model of Ford. This vehicle also uses an ABS module to control the wheel system. However, if your ABS module is not working properly, you should replace it without any doubts.
First of all, you need to install the Ford Programmable module using Ford IDS software. You can also use other pro software to install the program and fix the problem.
Similarly, you should also check out the ABS control module so that you can ensure your car’s ABS system is good or bad. Most of the time, the ABS module comes with a programmable problem.
2013 Ford Edge ABS Module Replacement
Like other models of Ford Edge (2011 or 2012), the 2013 Ford Edge ABS may also come with some programmable problems and you need to fix the programmable system with a replacement.
To replace your 2013 Ford Edge ABS module, you need to install a new program on your system. You just need to install a programmable module using Ford IDS software.
On the other hand, you will also use other premium software to replace the module. Note, that all of the software has not worked to replace the ABS module.
When Should You Call an Expert?
The average cost for a Ford Edge ABS module replacement is between $725 and $885. It is truly costly right? You can reduce this cost to know when you need to hire an expert for replacement.
Check out the following points to know about this matter clearly. Based on my experience, you should hire when you don’t have the following points.
- When you are not an expert in completing the process
- When you never doing this type of job
- If you don’t have enough tools and elements
- Hardly know about the safety feature
FAQs (Frequently Ask Questions)
Q: How much does it cost to replace the ABS module on the Ford Edge?
Answer: Though it depends on the model of Ford Edge, you may need to spend &725 to $885. Based on the shop and labor experience, the amount ups and downs. It would be better for you to contact a reputed shop to know the accurate price range.
Q: How often do ABS control modules need to be replaced?
ABS module is not common and people get it hardly. Most of the time, ABS modules last a lifetime. However, if you maintain the brake system regularly, you should not worry about it.
However, if you face the above symptoms of the ABS module, you should replace it after 4 years. It is truly rare to face the ABS module problem.
To avoid your vehicle’s ABS module problem, you should maintain the brake system regularly. On the other hand, you should also focus on the module computer program and if needed you should reprogram the ABS module.
Q: Can I replace the ABS module myself?
Answer: If you have a professional skill and doing this task one or two times, you can replace the ABS module by yourself. But, it is recommended that you leave this task for a professional skilled person to avoid any major mistakes.
Q: What causes the ABS module to fail?
Answer: Malfunction is the major cause of which failure of your vehicle’s ABS module. When an ABS module comes with debris or is contaminated with metal shavings. On the other hand, a bad wiring connection is another cause that also failed your vehicle’s ABS module system.
What Next?
Now, you have enough information to replace your Ford Edge ABS module without facing any troubles. It is a little bit costly to hire an expert person to replace the ABS module. But, if you’re not professional, you should leave this task to a professional and skilled person to avoid damage and safety hazards.