The Best 7.3 Powerstroke Oil Filter| Specs & Comparison

The 7.3 Powerstroke was manufactured by Ford from 1994 to 2003. At that time and still, it was a popular diesel engine. Ford only postponed its development because modern engines required lower fuel consumption and exhaust emissions. So, later, they made a 6.0L version.

Additionally, the approximate dimensions of this V8 engine are as follows: L – 34″, W – 32″, and H – 38″. Most importantly, this engine directly supports injection and hydraulic electronic unit injection (HEUI).

Also, 7.3 power stroke heavy-duty engines always perform under heavy pressure, meaning extreme cold and hot weather. That’s why choosing the best 7.3 power stroke oil filter and oil is important. To get the best performance from your 7.3 power stroke engine, use the best oil filter for your following oil change.

7.3 Powerstroke Oil Filter

Basics Of 7.3 Powerstroke Oil Filter

Actually, the 7.3 powerstroke oil filter is specially designed for Lincoln, Ford, and Mercury automobiles. If you use this oil filter on your particular vehicle, you can reduce emissions and extend your oil life.

But as we know, Oil and filter changes are the most basic maintenance requirements. Oil changes with a quality filter can significantly extend engine life. Aftermarket oil filters typically have improved materials and filter media.

Sometimes, there is a greater capacity for increased filter media surface area. Ford 7.3 oil filter part number is FL1995. You may be wondering about the 7.3 powerstroke oil filter location. Actually, you can find oil filters next to the oil pan.

As we know, the power stroke is a diesel engine, and you need to use synthetic, semi-synthetic, and similar oils. Generally, Ford always recommends using 5w40 and 15w40 oil to get the best result. With a filter, you must use 25 quarts of oil on this engine. From these 15 quarts, 2 quarts will filter, and 13 quarts are crankcase.

7.3 Manufacturer’s Recommended Oil Filter For Powerstroke:

It’s always better to get information from the source, isn’t it? Well, let’s learn what the manufacturers say about this engine. To summarize, the 7.3 Powerstroke runs best on two types of oil—15W40 oil for regular and hot temperatures and 5W40 oil for cold start.

So, keep this in mind when changing your filter. The reason is that it should be compatible with these oils. Also, you can refer to FORD OEM for the FL-2051 filter for better convenience. Remember to check your automobiles with the ‘Intelligent Oil Life Monitor.’

7.3 PowerStroke Oil Filter Specifications:

  • Oil Filter Style: Canister
  • Height(in):7.840in.
  • Outer Diameter(in):4.250in.
  • Filter Bypass Relief Valve: Yes
  • Anti-Drainback Valve: Yes
  • Smallest Particles Filtered:20 Microns
  • Max Burst Pressure(psi):200 phi
  • Thread Size: 1 ½ -16in.
  • Quantity: Sold individually

Best 7.3 Powerstroke Oil Filter:

Diesel engines are sensitive, so you need to choose a compatible filter. Not every user selects the same oil filter. Some choose Motorcraft, Wix, and Napa for their 7.3 Powerstroke.

Its leading cause is that Ford was recommended to use it and created it as ONE blueprint. Some users recommended the Donaldson filter with high-mileage features. It’s because they are robust and high-performance.

Others claim that Mobil, Walmart, and Purolator filters can also help to keep your truck running smoothly. However, let’s discuss some of the best and most reliable 7.3 power stroke oil filters in detail below:

7.3 Power stroke Oil Filter Wix

Are you searching for a 7.3 Power stroke Oil Filter? Don’t look anywhere. Just choose this WIX XP Oil Filter. This top-of-the-line filter offers extraordinary protection for your engine. More importantly, it includes a lid to change this filter quickly and easily.

Moreover, this filter offers strong engine protection with synthetic motor oil for harsh driving conditions. Typically after 3,750 to 10,000 miles, you can maintain OEM oil and filter change intervals with this WIX.

Its silicone anti-drain back valve prevents dry starts by exceeding conventional filter change intervals when applicable.

Pros And Cons Of WIX Oil Filter:

Pros:

  • Help to keep the engine running smoothly
  • It can trap up to 100% more dirt and contaminants.
  • Provides a good seal when an extreme cold engine starts.
  • Resist hardening under elevated oil temperatures.
  • Provides one-year limited warranty.

Cons:

  • Uneven pleats spacing

7.3 Powerstroke Oil Filter Fram

FRAM oil filters for 7.3 are designed to get drivers maximum performance and protection. Features of dual-layer synthetic blend media give 99%+ filtering efficiency. Besides, it protects your engine up to 20,000 miles (32,000 km).

The anti-drain rear valve made of silicone ensures you safely start the engine. In fact, SureGrip® technology offers a no-slip surface that is easy to install and remove. So, if you want to extend your oil filter life daily, you can choose this Farm oil filter.

Pros and Cons Of 7.3 Powerstroke Oil Filter Farm

Pros:

  • Provides advanced engine protection up to 20,000 miles
  • Ensure the engine is safely
  • provides 99%+ filtration efficiency
  • Install and remove is very easy
  • Compatible with synthetic motor oil

Cons:

  • Don’t comes with rubber grip

7.3 Powerstroke Oil Filter Napa

Since 1966, the NAPA oil filter has been one of the most trusted oil filters. Most car enthusiasts and drivers prefer these brands of oil filters. Each is formulated to offer an improved power and performance benefit. Likewise, it can precisely remove pollutants from your engine so that you can get peak performance.

Don’t forget to keep up with maintenance to avoid potential breakdowns in the long run. Always replace your oil filter with a high-quality NAPA filter at every oil change interval!

Pros And Cons Of NAPA Oil Filter:

Pros:

  • Provide additional protection
  • Deliver positive seal to prevent oil bypass.
  • Silicone rubber anti-drain back valve provide safe engine startup.
  • Provide twice the dirt-holding capability.

Cons:

  • Not properly fit with 7.3 oil filter

7.3 Power stroke Oil Filter Baldwin

The Baldwin oil filter is another fantastic oil filter for your 7.3 power stroke engine. Typically, it works to remove contaminants from your engine’s sensitive parts. Indeed, from the mounting surface, the gasket gives an external seal between the engine and the filter.

In fact, if you want to get beat performance from your vehicle, you can use this Oil filter for your 7.3 Power stroke engine. The reason is that it can add style and is primarily durable.

Pros and Cons Of Oil Filter Baldwin:

Pros:

  • Remove pollutants to avoid damage
  • Highly reliable and robust
  • Increases engine life
  • Enhances the style of the engine

Cons:

  • A Slightly smaller filter than the original

7.3L Powerstroke Fuel Filter

The 7.3L Power Stroke has a single fuel filter in a valley close to the front of the engine. Furthermore, this 7.3 fuel filter drain valve and tube system allows the housing to drain remotely.

But if your fuel filter is destroyed, you should replace it properly. It’s because, due to these replacements, you can ensure your system is safe from filter blockage. Fortunately, you will be glad that the 7.3 powerstroke fuel filter replacement process is straightforward.

And in a matter of minutes, you can complete your replacement process. Nevertheless, you should frequently check and replace your fuel filter to avoid significant engine issues.

7.3 Powerstroke Oil Filter Cross Reference

Are you Searching for a 7.3 powerstroke oil filter comparison? Look no further; here, we provide some best alternative oil filters for your 7.3 Powerstroke engine.

Note that don’t take it seriously. Because this information is only for general reference. To get proper results, please check your application’s exact specifications and measurements.

  • D2 44-LF004
  • Purolator Pure One PL44872
  • Purolator L44872
  • Motorcraft FL-1995 (Ford Part # F4TZ-6731-A)
  • Fleetguard LF-3630 (Standard Media)
  • Fleetguard LF-3974 (Stratapore)
  • FleetguardLF-3374(Stratapore–Extended Capacity)
  • Wix 51734
  • NAPA 1734
  • Baldwin B703
  • AFE Proguard D2 44-LF004
  • K&N HP6001
  • CarQuest 85734
  • Fram Tough Guard TG3786
  • Amsoil SDF99
  • Donaldson
  • John Deere TY24772
7.3 Powerstroke Oil Filter

FAQ(Frequently Asked Questions)

Q. How big is a 7.3 oil filter?

7.3 oil filters height(in)7.840in and outside diameter(in)4.250in.

Q. What oil is recommended for 7.3 Powerstroke?

It’s important to know that medium-duty diesels like the 7.3 are unlike passenger car gas engines. On your 7.3 powerstroke engine, you need to use diesel-rated oil. 90% of people mainly use 15w40 and 10w30 for their 7.3 powerstroke engine.

Q. How many quarts of oil in a 7.3 Powerstroke?

7.3 powerstroke fluid capacity includes 15 quarts of 15w40 diesel engine oil. 13 quarts of oil take an oil pan, and 2 quarts of oil take an oil filter.

Q. What oil does a 95 7.3 Powerstroke take?

For your 1995 7.3 powerstroke engine, you should use SAE 15w40 and 10w30 (-23c) (-10F) to -1C (31F); SAE 15w40 is needed above -1 C (31 F). The capacity is 13.9 quarts with a filter. Remember that when you refill your engine, remove your dipstick to offer adequate air.

Final Word

On the other hand, after so much research, we know dozens of 7.3 oil filters exist. Here, we have discussed some of the well-known 7.3 powerstroke oil filter brands. These oil filters protect your fuel system from contaminants and foreign particles.

Ultimately, since they all come from high-quality materials, they are robust, durable, and enhance strength. However, you can decide which oil filter you must choose after knowing the authentic information.